Sur Ron Egg Rider Display Case Install Instructions

by Ashley Romanowski

Billet Aluminum Protective Case for Egg Rider Display Install Instructions

Needed Tools: 2.5mm Hex Wrench, 3mm Hex Wrench

 

1. Remove EggRider Display Screw with 2.5mm Hex Wrench.

2. Remove pin from EggRider Display using a small nail or paper clip.

3. String cable through case and install screw that came with your EggRider Display using 2.5mm Hex Wrench.

4. Mount case onto handle bar with a 3mm Hex Wrench using provided clamp and screws.

V2 Egg Rider Foam Cable Guard 

This foam will help protect the fragile Egg Rider cable from scratching and pressure. We recommend the use of this foam.

1. Peel white paper off of the included foam.

2. Apply foam to the center of the front side of the Egg rider case first.

3. Last fold under Egg Rider case to the back

 

Back to Blog